Hardchrome
Hardness and whether the chromium industry
Hardness JIS standard requiring more than HV 800.
Hardness of Siam hard chrome plated limited HV 1000 + 100.
The melting point of the chromium industry than 1900 ° C.
(Hardness HV 800 = HRC 64, HV 900 = HRC 67).
Hard Chrome Benefit. On parts, general machinery
1. Advantages of the junction of chromium in industrial machinery parts. When chromium junction Industry, it is difficult to feel Skin chrome plated and chrome metal grate last for more.
2. The gravure prints. In print or on the printing plate, etc., to make the lifetime durability several times. The cartridges are easy to peel Print
this beautiful
3. Roll Forming When plating will make many times more durable lifespan.
4. To extend the lifetime of plastic injection molds and molded Bakelite. Plastic out of print, it does not rust,
especially pieces that need work surface mirror.
5. roller, pickup roller, roller TIN PLATE ROLLER like to extend lifespan longer. The skin is scratched or worn rollers make it smaller diameter of the roller slowly. And as of course to save face. And the cut surface of the roller
6. core and shell of the hydraulic. When moistened, and then to maintain silicon rubber to last for more resistant sun in use.
Mold & die
1. Reduce the oil in the mold only 1/7 of the mold.
2. Reduce the cost of cleaning products. After completion of the pump
3. chrome on a smooth surface for most of the metals together. To prevent corrosion on the die and the work piece.
4. Reduce the cost of the polished surface.
5. Reduce the time to pump and reducing the cost of stamping parts without the plastic cover protecting the stamping for the job.
6. To maintain the time to deliver products on time and anywhere.
7. Reduce stock parts to pumps. The mold is always new
8. prevent rust on the printed page
9. piece out of the mold easily.
10. prolong the lifetime of the mold.
11. dust does not stick to the mold easily. On steel or zinc bath to peel.
12. Anti caused by debris. While working very well because the chrome surface hardness than steel at the pump.
Dirt will not stick to the surface of the
workpiece to die. To the specimen was scored only one. If the mold surface is not chrome.
Debris will cause mold surface is scratched.
And Roy are extended indefinitely while the mold was broken in the end.
13. Keeping the mold is already working well. This saves the mold maintenance
14. chrome plating industry on the mold is made "JUST IN TIME" to build up.